home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Best of Windows 95 Shareware
/
The Best of Windows 95 Shareware (Wayzata Technology)(1996).ISO
/
mac
/
Graphics
/
ocr
/
READ.ME
< prev
next >
Wrap
Text File
|
1995-09-05
|
2KB
|
53 lines
Cognitive Technology Corp. OCR Software
100 Larkspur Landing Circle #106
Larkspur, California, 94939, U.S.A.
Tel. (415) 925-0707
Sales:(415) 925-2323
Fax: (415) 461-4010
BBS: (415) 925-0733
Compuserve: 76600,1623
Internet: ctc@well.com
Copyright (C) 1992-1995, Cognitive Technology Corp.
All Rights Reserved.
CONTENTS
1. Hardware and Software Requirements.......................2
2. Installation of CuneiForm................................2
3. Setting up Scanner.......................................2
1. Hardware and Software Requirements
To use Cuneiform in MS Windows 3.1 or higher environments,
the following minimum configuration is recommended:
* A 386,486 or Pentium PC with at least 4 MB
(preferably 8 MB) RAM , 4 MB of free space at hard disk
* MS DOS 3.3 or later , MS Windows 3.1 or higher
with 10 MB permanent swap file running in 386 enhanced mode
2. Installation of Cuneiform under Microsoft Windows 3.1
* Installation must be done under Windows Program Manager by
typing <Alt>F(ile), R(un).
* Insert the diskette in a floppy disk drive and run A:SETUP
* The program will request the hard disk drive and directory name
where the CuneiForm software is to be placed.
3. Setting up Scanner
* Before you will use a scanner it is nesessary to include your
scanner driver in your CONFIG.SYS file and reboot your system.
All scanners are usually sold with scanner drivers. These drivers
must be compatible with Windows 3.1.